Wropo logo
Прапор Таїланд Таїланд
Опублікувати рекламу
  1. Домашній
  2. Бізнес
  3. Продукти та Запаси
Будь ласка, майте на увазі, що Wropo діє як класифікована платформа оголошень і не перевіряє рекламодавців чи їх списків. Переглянути більше

Ми не маємо прямого знання наших користувачів, а також не контролюємо їх діяльність. Уникайте надсилання грошей заздалегідь людям, яких ви не знаєте. Завжди обережно здійснюйте обережність в Інтернет-транзакціях та перевіряйте інформацію перед тим, як продовжувати. Переглянути менше

MTD-A100 Mold Powder Thickness Detection System

Floria Liang Продукти та Запаси, Бангкок, IMG-0
Floria Liang Продукти та Запаси, Бангкок, IMG-1
Переклад: Прапор UK Оригінальний

Overview
Mold powder is mainly used in the continuous casting and steelmaking process, evenly sprinkled on the molten steel surface in the mold to lubricate, keep warm, prevent oxidation and absorb non-metallic inclusions. Mold powder is an indispensable auxiliary production material in the production process. In the process of evenly distributing the mold powder to the molten steel surface of the mold, the amount of mold powder should be controlled, and the thickness of the mold powder should be within a certain range. If the coverage thickness of the mold flux is too thin, it will cause no heat preservation, oxidation of molten steel, inclusions, cracks, large drawing resistance, steel leakage, etc. At the same time, the coverage thickness of mold flux should not be too thick, they cant melt in time with too much mold powder, if the molten steel is churning, it is easy to get the mold powder into molten steel at this time, resulting in mold leakage. Therefore, the amount of mold powder must be controlled within a reasonable range. The detection and control of mold flux thickness is very important, especially for the steel plants which are strict with the steelmaking production process.

The detection principle
The mold flux detection system developed by Wuhan CenterRise M&C Engineering CO., Ltd. uses the laser triangular sensor fixedly installed above the mold to obtain the height h1 by scanning the upper surface layer of mold flux with high-precision laser triangulation. When the laser measuring head is placed each time, the height h3 of the upper nozzle of the mold will be marked, and the system through the PLC system which is connected to the continuous casting machine through the network to introduce the height h1 of the mold liquid level. Through the calculation of three heights, we can get the thickness of mold powder H = 900-h1-(h3-h2)mm (900mm is the depth of mold).

The features
The system adopts a high-precision laser triangulation distance meter, which can measure the thickness of the mold flux with high speed and high precision, and the accuracy can reach 1mm.
The equipment is easy to install and use. When we are using, the laser rangefinding sensor can be placed directly above the mold without affecting production.
The system can be interlocked with the automatic mold powder feeding system to automatically adjust the amount of mold powder, so as to automatically control the amount of mold powder within a reasonable range and realize intelligent automatic mold powder feeding.
Non-contact measurement, the system only needs ventilation protection, simple and stable to use.

The parameters
Measurement range0-50mm
Temperature measurement range: -20-700
Equipment installation distance

Ціна: ฿0
Телефон: 15727288019
Whatsapp: Ні
Категорія: Продукти та Запаси
Тип: Професіонал
Місто: Бангкок
Область: Bangkok
Довідник: TH-667B7DA152
Останнє оновлення: 1 рік тому
Відвідування: 177
Floria Liang Avatar Bg

Floria Liang

Зареєстрований на 26 червня 2024

Зателефонуйте зараз, щоб безпосередньо зв’язатися з продавцем.

Більше оголошень
MOC-N300 Mould Oscillation and Deflection Detection Instrument

1

MOC-N300 Mould Oscillation and Deflection Detection Instrument

฿0

Бангкок

Бізнес » Продукти та Запаси

Професіонал

1 рік тому

BPS-K600 Mold Breakout Prediction System

3

BPS-K600 Mold Breakout Prediction System

฿0

Бангкок

Бізнес » Продукти та Запаси

Професіонал

1 рік тому

ZSQ-T200 Online Surface Quality Inspection System for Continuously Cast Product CCD

1

ZSQ-T200 Online Surface Quality Inspection System for Continuously Cast Product CCD

฿0

Бангкок

Бізнес » Продукти та Запаси

Професіонал

1 рік тому

WGS-L200 Slab Plate Steel Width Measuring System

1

WGS-L200 Slab Plate Steel Width Measuring System

฿0

Бангкок

Бізнес » Продукти та Запаси

Професіонал

1 рік тому

CPC-D100 CPC Photoelectric Strip Automatic Center Position Control System

2

CPC-D100 CPC Photoelectric Strip Automatic Center Position Control System

฿0

Бангкок

Бізнес » Продукти та Запаси

Професіонал

1 рік тому

SCL-L102 High-Precision Billet Cut-by-Weight Cut-to-Length System

1

SCL-L102 High-Precision Billet Cut-by-Weight Cut-to-Length System

฿0

Бангкок

Бізнес » Продукти та Запаси

Професіонал

1 рік тому


Wropo logo
  • Міста
  • Регіони
  • Країни
  • Політика конфіденційності
  • Умови та положення
  • F.A.Q.
  • Ціноутворення
  • Контакт

Wropo працює як класифікована платформа оголошень. Ми не володіємо, не керуємо і не гарантуємо будь-які товари чи послуги, перелічені сторонніми рекламодавцями.

© 2025 Wropo. Усі права захищені.

Виберіть категорію